CAT 3126B Fault Code: 110-11 PID: Flash Code 61 SPN: 110 FMI: 16 High Coolant Temperature Warning
The Engine Control Module (ECM) detects the following conditions:
•For C7 engines that are not in emergency vehicles, the engine coolant temperature is at least 108° C (226° F) for more than ten seconds.
•For C7 emergency vehicles and for C9 vehicles, the engine coolant temperature is at least 113° C (235° F) for more than ten seconds.
•For C9 emergency vehicles with automatic transmissions, the engine coolant temperature is at least 118° C (244° F) for more than ten seconds.
•The engine has been running for at least 30 seconds.
Note: This diagnostic code represents an event. This diagnostic code does not represent an electronic system fault.
Probable causes:
1) High ambient air temperature or high inlet air temperature
2) Low coolant level
3) Radiator failure or restiction in cooling system
4) Fault water temperature regulator
5) Faulty coolant temperature sensor or circuit
6) Excessive load
-
Wabco ToolBox plus 13.7 + ECAS CAN2 v3.00 Diagnostics Software
Trucks software $84.00Rated 0 out of 5
-
Eaton Service Ranger 4.9 Engineering 4.9 [05.2021] Engineering Level ( 1 PC )
Eaton $67.00Rated 0 out of 5 -
DETROIT DDDL 8.14 SP3 – Detroit Diesel Diagnostic Link 8.14 SP3 2021 ( 1PC )
Detroit $73.00Rated 0 out of 5
Related products
-
CAT 3126B Fault Code: 168-00 PID: Flash Code 51 SPN: 168 FMI: 0 Excessive ECM Battery Power
3126BRated 0 out of 5 -
CAT 3126B Fault Code: 252-11 PID: Flash Code 59 SPN: 631 FMI: 11 Incorrect Engine Software
3126BRated 0 out of 5 -
CAT ET 2021A (Caterpillar Electronic Technician) + Factory Password (1 PC )
CAT $65.00Rated 0 out of 5 -
CAT 3126B Fault Code: 71-01 PID: Flash Code 47 SPN: FMI: Idle Shutdown Occurrence
3126BRated 0 out of 5 -
CAT Engine Reprogramming Tool for flash programming C1.8, C2.4, C3.8 & C3.3B + Guide
CAT $50.00Rated 0 out of 5 -
CAT 3126B Fault Code: 231-11 PID: Flash Code 58 SPN: 639 FMI: 12 J1939 Data Link Fault
3126BRated 0 out of 5