CAT 3126E Fault Code: 105-00 PID: Flash Code 64 SPN: 1636 FMI: 15 High Intake Manifold Air Temperature Warning
The Engine Control Module (ECM) detects the following conditions:
•The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).
•The engine coolant temperature is greater than 99 °C (210.2 °F).
•The engine has been running for at least 30 seconds.
Note: This diagnostic code represents a critical event. This diagnostic code does not represent an electronic system fault.
Possible Causes:
1) Sensor failure
2) Sensor connector/harness
3) Check connection at ECM and harness between sensor & ECM
![International Truck ISIS - Oncommand Service Information Q4.2020 [04.2020]](https://www.ecuforcetruck.com/wp-content/uploads/2022/01/OnCommand-2020-1-300x300.png)
