Cummins X12 CM2350 X119B (2018 & Newer) Fault Code: 4213 PID: SPN: 3695 FMI: 2 Aftertreatment Regeneration Inhibit Switch- Data Erratic, Intermittent, or Incorrect
The OEM truck manufacturer can install a permit switch in the dash or send an inhibit message via the J1939 data link to the engine ECM. The function of the inhibit message is to prevent the aftertreatment system from performing mobile regenerations.
The aftertreatment regeneration permit switch can be an actual switch in the vehicle dash or it can be a J1939 message sent via the J1939 data link. Refer to the OEM service manual.
Conditions for Running the Diagnostics
This diagnostic runs continuously when the engine is running.
Conditions for Setting the Fault Codes
The Engine Control Module (ECM) detected the aftertreatment regeneration permit switch is stuck in the OFF or INHIBIT position and the ECM is requesting active regeneration.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp immediately when the diagnostic runs and fails.
Active and stationary regeneration of the diesel particulate filter will be disabled.
Engine torque will be reduced if the engine is operated for an extended period of time with this fault active.
Conditions for Clearing the Fault Code
To validate the repair, start the engine and perform the INSITE™ electronic service tool Aftertreatment Diesel Particulate Filter Regeneration Test.
The ECM will turn off the amber CHECK ENGINE lamp immediately after the diagnostic runs and passes.
For On-Board Diagnostics (OBD) engines, the ECM will extinguish the Malfunction Indicator Lamp (MIL) after three consecutive trips where the diagnostic runs and passes.
The Reset All Faults command in INSITE™ electronic service tool can be used to clear active and inactive faults, as well as extinguish the MIL for OBD applications.
Possible causes of this fault code include:
A malfunctioning aftertreatment regeneration permit switch circuit.
Incorrect feature and parameter settings
1) ECM calibration
Download Renault Trucks NG3 NG10 calculator v0.1Renault $26.00
Diamond Logic Builder DLB 2019 Database 2019Navistar $50.00
John Deere Service Advisor 5.3 CF & AG 2020.08John Deere $200.00
ZF Testman Pro Development ESB 10.5 Trucks software $200.00
Eaton Service Ranger 4 4.2 database 2017Eaton $50.00
SERVICE MANUAL BENDIX EC-60BENDIX $17.00
SERVICE MANUAL HINO FD.FE.FF.SG 2011_2013HINO $34.00
SERVICE MANUAL Fuso FK & FM Series 2008-2010FUSO $28.00
SERVICE MANUAL BOBCAT 2400 smsBOBCAT $48.00
SERVICE MANUAL BOBCAT 853 smsBOBCAT $40.00
SERVICE MANUAL DETROIT DDDC IVDETROIT $48.00
SERVICE MANUAL International Engines MaxxForce DT 9 10 (2007-2009)INTERNATIONAL ENGINES $30.00
SERVICE MANUAL International Engines VT275 (2004 & Older)INTERNATIONAL ENGINES $21.00
SERVICE MANUAL DETROIT DIESEL DDDL 7 UDETROIT $20.00
SERVICE MANUAL BOBCAT 316 SMSBOBCAT $45.00