Detroit DD13 GHG14 (2014-16) Fault Code: SPN 5358 FMI 16 (MCM) Cylinder #1 Engine Smoothness Control/Quantity Low

NOTE: This fault is caused by low power on cylinder #1. Motor control module (MCM) adjusts injector pulse for smooth idle – min valve reached.

DESCRIPTION:
Cylinder #1 engine smoothness control quantity low.

MONITORED PARAMETER:
Cylinder 1 fueling error.

TYPICAL ENABLING CONDITIONS:
Engine smoothness control.

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
Continuous when enabling conditions met.

TYPICAL DURATION:
Two seconds

DASH LAMPS:
MIL

ENGINE REACTION:
None

POSSIBLE CAUSES:
The entry conditions for this code are:
1. Engine speed is above low idle.
2. All cylinders are active, no fault reactions.
3. Engine speed/torque is steady.

This fault can occur due to the conditions listed below:
1. Drivetrain vibrations.
2. Cylinder kit failure.
3. Valve train failure.
4. Lash adjustments.
5. Fuel injector.
6. High pressure fuel line (rail to fuel injector).
7. Debris entering fuel injector (intermittent faults).

NOTE: This fault is caused by lower power to the cylinder.

PROBABLE CAUSES:
1. Cylinder kit failure.
2. Valve train failure.
3. Lash adjustment.
4. Fuel injector.
5. High pressure fuel line (rail to injector).
6. Debris entering fuel injector (intermittent faults).