Detroit DD15 EPA10 (2010-13) Fault Code: SPN 190 FMI 0 (MCM) Engine Over Speed
This fault code sets when the engine speed is above 2500 rpm.
TYPICAL ENABLING CONDITIONS:
Engine speed greater than idle.
Continuous when enabling conditions met.
Engine brakes are activated.
Start and run the engine.
1. Vehicle was driven downhill in too low of a gear or without using the engine brakes.
2. Crankshaft speed sensor fault.
3. External combustible fluids drawn into the air intake.
NOTE: This fault code can be induced by the driver while the vehicle is traveling downhill. There will be a message in the instrument cluster (IC) to warn the driver that the engine speed is too high. The check engine light (CEL) will also sets at this time. Once the engine rpm is within normal operating range, the message in the IC and the CEL will no longer be present.
NOTE: This is an information only code. It means the engine went after than 2500 RPM for a specified time. Talk to the driver.
DOWNLOAD CNH EST 9.8 ENGINEERINGCNH $115.00
CAT ET Electronic Technician 2018CCAT $45.00
Isuzu E-IDSS Diagnostic Service System 04.2022 ( 1 PC )ISUZU $126.00
SERVICE MANUAL MACK MP7 2007MACK $30.00
SERVICE MANUAL Carrie CT2-29-TV & CT3-44-TVCARRIE $21.00
SERVICE MANUAL BOBCAT 130 smsBOBCAT $52.00
Allison 1000 and 2000 Series Gen 4 (2005-11) Service manualAllison $10.00
SERVICE MANUAL BOBCAT 100 smsBOBCAT $54.00
SERVICE MANUAL BOBCAT 642b smsBOBCAT $47.00
SERVICE MANUAL MACK V-MAC IV (2010 Emissions)MACK $40.00