Detroit DD16 EPA10 (2010-13) Fault Code: SPN 4335 FMI 4 (ACM) Diesel Exhaust Fluid Metering Unit Air Pressure Sensor Circuit Failed Low
DESCRIPTION:
This code sets when the aftertreatment control module (ACM) detects a short to ground or an open wire on the diesel exhaust fluid (DEF) metering unit air pressure sensor circuit.
MONITORED PARAMETER:
Diesel exhaust fluid (DEF) metering unit air pressure sensor.
TYPICAL ENABLING CONDITIONS:
Always enabled
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Always enabled
TYPICAL DURATION:
Two seconds
DASH LAMPS:
1. MIL
2. CEL
ENGINE REACTION:
Derate 25%
VERIFICATION:
Engine idle: One minute.
PROBABLE CAUSES:
1. If 4335-3, 4334-3, and 3510-3 are present, repair the short to voltage between pin 3 of the DEF metering unit air pressure sensor and pin 84 of the ACM2.
2. If 4335-3 and 4334-3 and present, repair the open wire between pin 3 of the DEF metering unit air pressure sensor and pin 84 of the ACM2.
3. Wiring between the DEF metering unit air pressure sensor and the ACM2.
4. DEF metering unit air pressure sensor.
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1000 Class 2 Loss of Serial Data Communication
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1300 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1064 J1850 (Class 2) TBC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0876 Transmission Reverse Pressure Switch Circuit Stuck Open
1000 & 2000 Gen 4 $50.00 -
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
Allison 1000 & 2000 Gen 4 Fault Codes: P2773 Torque Control Request Ignored – ECM/TCM
1000 & 2000 Gen 4 $50.00