PACCAR MX (2004 Emissions) Fault Code: P103C EGR Control – Unable to Reach Target
PACCAR MX (2004 Emissions) Fault Code: P103C EGR Control – Unable to Reach Target
SET CONDITIONS:
The PCI ECU (D420) detects that the demanded NOx conversion is limited by the EGR system limits for more than 300 seconds.
DIAGNOSTIC CONDITION:
This diagnostic runs:
1. When the engine is running at a steady load and
2. Coolant temperature is above 50°C [122°F]
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back? (Can be pending, inactive or active)
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
1. Leaking EGR system
2. Clogged EGR system
3. Clogged EGR pressure difference sensor venturi
4. NOx before catalyst sensor deviation
ADDITIONAL INFORMATION:
One way in which the engine NOx emission is controlled is by varying the EGR flow toward the inlet manifold of the engine.
Related
-
Scania SDP3 2.48.6 Diagnosis & Programming for VCI 3 VCI3 without Dongle
Scania $30.00Rated 0 out of 5 -
JOHN DEERE SERVICE ADVISOR 5.3.225 DATABASE AG + CF ENGLISH 2023
John Deere $250.00Rated 0 out of 5
-
CAT CDVR PC Software – Caterpillar Digital Voltage Regulator (CDVR) WINDOWS 10
CAT $45.00Rated 0 out of 5 -
DETROIT DDDL 8.14 SP3 – Detroit Diesel Diagnostic Link 8.14 SP3 2021 ( 1PC )
Detroit $73.00Rated 0 out of 5 -
John Deere & Hitachi Parts ADVISOR 2020 [08.2020] Offline DVD Spare Parts Catalog
John Deere $120.00Rated 0 out of 5 -
PACCAR Electronic Service Analyst 5.4.3.0 SW files 27.03.2021 software trucks
PACCAR $60.00Rated 0 out of 5 -
volvo Devtool Studio V2 / V3 / V4 Developer tool plus 2.6 / 2.7
Trucks software $35.00Rated 0 out of 5