CM850

Showing 1–12 of 580 results

Default sorting Sort by popularity Sort by average rating Sort by latest Sort by price: low to high Sort by price: high to low

• 

  Cummins ISB CM850 (2003-06) Fault Code: 111 PID: SID 254 SPN: 629 FMI: 12 Engine Control Module – critical internal failure. Error internal to the ECM related to memory hardware failures or internal ECM voltage supply circuits.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1117 (Auto) PID: SID 251 SPN: 627 FMI: 2 Power Lost Without Ignition Off – Data Erratic, Intermittent, or Incorrect. Supply voltage to the ECM fell below 6.2-VDC momentarily, or the ECM was not allowed to power down correctly (retain battery voltage for 30 seconds after key OFF).

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1117 (Marine) PID: SID 251 SPN: 627 FMI: 2 Power Lost without Ignition Off – Data Erratic, Intermittent, or Incorrect. Supply voltage to the ECM fell below +6.2-VDC momentarily, or the ECM was not allowed to power down correctly (retain battery voltage for 30 seconds after key OFF).

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1119 PID: 110 SPN: 110 FMI: 0 Engine Coolant Temperature – Data Valid But Above Normal Operating Range – Moderately Severe Level. Engine coolant temperature signal indicates engine coolant temperature is above engine protection warning limit.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1139 PID: SID 1 SPN: 651 FMI: 7 Injector Solenoid Driver Cylinder 1 – Mechanical System Not Responding Properly or Out of Adjustment. Unintended fueling detected in cylinder number 1.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1141 PID: SID 2 SPN: 652 FMI: 7 Injector Solenoid Driver Cylinder 2 – Mechanical System Not Responding Properly or Out of Adjustment. Unintended fueling detected in cylinder number 2.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1142 PID: SID 3 SPN: 653 FMI: 7 Injector Solenoid Driver Cylinder 3 – Mechanical System Not Responding Properly or Out of Adjustment. Unintended fueling detected in cylinder number 3.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1143 PID: SID 4 SPN: 654 FMI: 7 Injector Solenoid Driver Cylinder 4 – Mechanical System Not Responding Properly or Out of Adjustment. Unintended fueling detected in cylinder number 4.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1144 PID: SID 5 SPN: 655 FMI: 7 Injector Solenoid Driver Cylinder 5 – Mechanical System Not Responding Properly or Out of Adjustment. Unintended fueling detected in cylinder Number 5.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 1145 PID: SID 6 SPN: 656 FMI: 7 Injector Solenoid Driver Cylinder 6 – Mechanical System Not Responding Properly or Out of Adjustment. Unintended fueling detected in cylinder Number 6.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 115 PID: 190 SPN: 612 FMI: 2 Engine Magnetic Crankshaft Speed/Position Lost Both of Two Signal – Data Erratic, Intermittent, or Incorrect. The ECM has detected that the primary engine speed sensor and the backup engine speed sensor signals are reversed.

  Cumminz

  Rated 0 out of 5
• 

  Cummins ISB CM850 (2003-06) Fault Code: 122 PID: 102 SPN: 102 FMI: 3 Intake Manifold Pressure Sensor Circuit – Voltage Above Normal or Shorted to High Source. High signal voltage detected at the intake manifold pressure circuit.

  Cumminz

  Rated 0 out of 5