The Engine Oil Level/Temperature Sensor contains two thermistors, one for engine oil temperature and one for engine oil level. The resistance of the engine oil temperature portion of the sensor changes inversely to the temperature of the engine oil. When the engine oil is cold, the sensor resistance is high. As the temperature of the engine oil increases, the sensor resistance decreases.
The Engine Control Module (ECM) monitors the voltage drop across the sensor and uses this signal to warn the driver and derate the engine to avoid engine damage if the signal is not within programmed limits.
Conditions for diagnostic trouble code (DTC):
1) The voltage at pin A14.EA:31 is below normal value
Observable symptoms
1) The engine oil temperature (EOT) is continously shown as 0 when the engine is running
Probable cause
1) Engine oil level (EOL) and temperature sensor
2) Short circuit to ground, Signal wire
3) Connector
Related products
-
Volvo All Engines (2013 Emissions) Fault Code: U300043 PID: EMS Electronic Control Unit
All Engines (2013 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P020211 PID: EMS Cylinder 2 Injector “A”
All Engines (2013 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P10C012 PID: EMS Volvo Compression Brake (VCB) Control “2” Circuit
All Engines (2017 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P042200 PID: EMS Catalyst System Efficiency Below Threshold (Bank 1)
All Engines (2013 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P040913 PID: EMS EGR Differential Pressure Sensor
All Engines (2017 Emissions)