Volvo All Engines (2010 Emissions) Fault Code: SPN 3031 FMI 5 PID: PPID 274 Aftertreatment Diesel Exhaust Fluid (DEF) Tank temperature
Aftertreatment Control Module (ACM) monitors DEF tank temperature and uses it to control the Aftertreatment DEF Tank Heater valve to keep the DEF from freezing.
This temperature monitoring is also used to avoid stopped DEF dosing due to high DEF tank temperatures. If the DEF temperature is too high, reverse flow will be activated, if the temperature stays high for a short duration, a DTC is set.
Conditions for diagnostic trouble code (DTC):
1) Open circuit between Electronic Control Unit and Sensor
Observable symptoms
1) Engine de-rated
Probable cause
1) Connector
2) Wiring harness
3) Short circuit to higher voltage, Signal wire
4) Open circuit on signal wire
5) Open circuit, Ground wire
6) Aftertreatment diesel exhaust fluid (DEF) tank, Temperature Sensor
Related products
-
Volvo All Engines (2017 Emissions) Fault Code: P20E892 PID: EMS Reductant Pressure Too Low
All Engines (2017 Emissions) -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0721 Output Speed Sensor Circuit Performance
1000 & 2000 Gen 4 $50.00 -
-
-
-
-
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 25 PID: SPN: 102 FMI: 3 Boost Pressure voltage high
3406E (Prefix 1MM or 2WS) -
Volvo All Engines (2017 Emissions) Fault Code: P02E300 PID: EMS Diesel Intake Air Flow Control Circuit High
All Engines (2017 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P034038 PID: EMS Camshaft Position Sensor “A” Bank 1 or Single Sensor
All Engines (2017 Emissions) -
-
Volvo All Engines (2004 Emissions) Fault Code: SID 2 FMI 5 Fuel Injector Unit #2
All Engines (2004 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P02E011 PID: EMS Diesel Intake Air Flow Control
All Engines (2017 Emissions) -
-
-
-
