The aftertreatment control module (ACM) monitors the pressure build up in the diesel exhaust fluid (DEF) dosing system. This diagnostic function checks the time it takes for the DEF dosing pressure to reach more than 650 kPa (94 psi). If the pressure is not reached in 20 minute(s) this DTC will be set.
Conditions for diagnostic trouble code (DTC):
1) Aftertreatment DEF Dosing Pressure Lower than expected
Observable symptoms
1) No aftertreatment diesel exhaust fluid (DEF) dosage
2) Engine de-rated
Probable cause
1) Empty tank
2) Frozen aftertreatment diesel exhaust fluid (DEF)
3) DEF Supply from Aftertreatment DEF Tank disconnected
4) Aftertreatment DEF Line(s) Leakage
5) Aftertreatment DEF dosing valve Leakage
6) Aftertreatment Diesel Exhaust Fluid (DEF) Pump Leakage
7) Damaged sending unit inside the aftertreatment DEF tank
8) Damaged or clogged filter
9) Aftertreatment DEF Dosing Pressure Sensor, Incorrect value
10) Aftertreatment Diesel Exhaust Fluid (DEF) Return Valve
11) Blocked DEF tank ventilation hose
12) Air in the system
13) Crystallization inside the DEF pump
14) Low level in Aftertreatment diesel exhaust fluid (DEF) tank
15) Contamination or debris inside DEF tank
Related products
-
Allison 1000 & 2000 Gen 5 Fault Code:U0074 CAN Communications BUS 2 Off
1000 & 2000 Gen 5
-
Volvo All Engines (2010 Emissions) Fault Code: SPN 677 FMI 3 PID: SID 39 Engine Starter Motor Relay
All Engines (2010 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P009B73 PID: EMS Fuel Pressure Relief Control
All Engines (2013 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P268C00 PID: EMS Cylinder 1 Injector Data Incompatible
All Engines (2013 Emissions)