The Fuel Pressure Sensor is used to detect low fuel pressure system failures. The sensor consists of a pressure sensitive diaphragm and amplifier. Fuel pressure causes the sensor’s diaphragm to deflect and produce an electrical signal proportional to the pressure. The diaphragm deflection signal is amplified in the sensor.
The sensor’s signal is monitored by the Engine Control Module (ECM).
The engine control module (ECM) will set a diagnostic trouble code (DTC) if the sensor signal is not within predetermined limits, or the signal is not rational.
Conditions for diagnostic trouble code (DTC):
1) The voltage at pin A14.EB:16 is less than 0.29?V
Probable cause
1) Engine Fuel Pressure Sensor
2) Engine wiring harness
3) Engine control module (ECM)
Related products
-
Volvo All Engines (2017 Emissions) Fault Code: U301700 PID: EMS Control Module Timer/Clock Performance
All Engines (2017 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P114101 PID: EMS Buffered Idle Validation Switch Wire – ECM Side
All Engines (2013 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P011200 PID: EMS Intake Air Temperature Sensor 1 Circuit Low Bank 1
All Engines (2017 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P009E73 PID: EMS Fuel Pressure Relief Control Performance / Stuck Off
All Engines (2017 Emissions)