Volvo All Engines (2010 Emissions) Fault Code: SPN 94 FMI 3 PID: Engine Fuel Delivery Pressure
The Fuel Pressure Sensor is used to detect low fuel pressure system failures. The sensor consists of a pressure sensitive diaphragm and amplifier. Fuel pressure causes the sensor’s diaphragm to deflect and produce an electrical signal proportional to the pressure. The diaphragm deflection signal is amplified in the sensor.
The sensor’s signal is monitored by the Engine Control Module (ECM).
The engine control module (ECM) will set a diagnostic trouble code (DTC) if the sensor signal is not within predetermined limits, or the signal is not rational.
Conditions for diagnostic trouble code (DTC):
1) The voltage at pin A14.EB:16 is more than 4.75?V
Diagnostic monitor condition
1) Key in ON position
Probable cause
1) Engine Fuel Pressure Sensor
2) Short circuit to 5V, Signal wire
3) Wiring harness
4) Engine control module (ECM)
Related products
-
-
-
-
-
Volvo All Engines (2013 Emissions) Fault Code: P24B100 PID: EMS Particulate Matter Sensor Circuit High
All Engines (2013 Emissions) -
-
-
-
-
Volvo All Engines (2017 Emissions) Fault Code: P114101 PID: EMS Buffered Idle Validation Switch Wire – ECM Side
All Engines (2017 Emissions) -
-
-
-
-
-
-
-
Volvo All Engines (2017 Emissions) Fault Code: P218F92 PID: EMS Reductant No Flow Detected
All Engines (2017 Emissions)
