Cummins X12 CM2350 X119B (2018 & Newer) Fault Code: 4572 PID: SPN: 3031 FMI: 9 Aftertreatment 1 Diesel Exhaust Fluid tank Temperature- Abnormal Update Rate
The aftertreatment diesel exhaust fluid tank temperature sensor is used to monitor the temperature of the aftertreatment diesel exhaust fluid inside the aftertreatment diesel exhaust fluid tank.
The aftertreatment diesel exhaust fluid tank temperature sensor is located in the diesel exhaust fluid tank. Location of the tank and temperature sensor is OEM dependent. Refer to the OEM service manual.
Conditions for Running the Diagnostics
This diagnostic runs continuously when the keyswitch is in the ON position or when the engine is running.
Conditions for Setting the Fault Codes
The Engine Control Module (ECM) detected a loss of communication with the aftertreatment diesel exhaust fluid tank temperature sensor.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp and/or the Malfunction Indicator Lamp (MIL) immediately when the diagnostic runs and fails.
Diesel exhaust fluid injection into the aftertreatment system is disabled.
Engine torque will be reduced if the engine is operated for an extended period of time with this fault active.
Conditions for Clearing the Fault Code
To validate the repair, perform a key cycle, start the engine and let it idle for 1 minute.
The fault code status displayed by INSITE™ electronic service tool will change to INACTIVE immediately after the diagnostic runs and passes.
The ECM will turn off the amber CHECK ENGINE lamp immediately after the diagnostic runs and passes.
For On-Board Diagnostics (OBD) engines, the ECM will extinguish the Malfunction Indicator Lamp (MIL) after three consecutive trips where the diagnostic runs and passes.
The Reset All Faults command in INSITE™ electronic service tool can be used to clear active and inactive faults, as well as extinguish the MIL for OBD applications.
Possible causes of this fault code include:
Incorrect terminating resistance of the SAE J1939 datalink circuit
Intermittent communication from the aftertreatment diesel exhaust fluid tank temperature sensor
An open or short circuit in the SAE J1939 datalink circuit
1) ECM calibration
Nexiq eTechnician 2.0.7447 2020NEXIQ $55.00
Nexiq eTechnician 1.3.62 2020 etechnician softwareNEXIQ $50.00
VOLVO PREMIUM TECH TOOL PTT 2.7.116 + APCI 2021 + devtool ( ONLINE )Trucks software $80.00
Meritor Wabco Tool Box 12.9.1Trucks software $35.00
SERVICE MANUAL Mack MP8-Euro3MACK $27.00
SERVICE MANUAL International Engines DT466 & DT530 (1999-2000) BINTERNATIONAL ENGINES $29.00
SERVICE MANUAL Fuso FK & FM Series 1986-1987FUSO $23.00
SERVICE MANUAL BOBCAT 700-720-721-722 smsBOBCAT $47.00
SERVICE MANUAL BOBCAT 116 smsBOBCAT $54.00
SERVICE MANUAL International Engines MaxxForce 15INTERNATIONAL ENGINES $40.00
SERVICE MANUAL Carrie Kingbird TDB / TDS 295CARRIE $28.00
SERVICE MANUAL Bendix ABS GEN 4 AND GEN 5BENDIX $12.00