Facebook-f Twitter Github Bitbucket
Shop
Account
Cart $220.00
1
1
Subtotal: $220.00
Isuzu US-IDSS 2024 Diagnostic is a comprehensive tool for the effective maintenance and repair of Isuzu vehicles. It integrates advanced diagnostic features to assist technicians in identifying and resolving issues promptly. This system supports a wide range of Isuzu models, ensuring compatibility with both US and Canadian specifications. Its capabilities include vehicle recognition, fault code analysis, and real-time data access to streamline the diagnostic process.
Isuzu US-IDSS 2024 Diagnostic
1 × $220.00
Subtotal: $220.00
View cart Checkout

Detroit DD13 EPA10 (2010-13) Fault Code: SPN 625 FMI 14 (CPC) MCM System ID/MCM_C01 Not Received or Stopped Arriving

DESCRIPTION:
MCM message not received or has stopped arriving.

MONITORED PARAMETER:
CAN communication

TYPICAL ENABLING CONDITIONS:
Always enabled

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
Always enabled

TYPICAL DURATION:
Two seconds

DASH LAMPS:
1. MIL
2. CEL

ENGINE REACTION:
None

NOTE: If there are any battery related faults, repair those first.

PROBABLE CAUSES:
1. If any engine components have been programmed recently and are inactive, clear then and test drive to see if they return.
2. Turn ignition off for 5 minutes (leave batteries connected) and turn back on to see if they went inactive.
3. Measure resistance across MCM 12-pin connector at pins 13 and 19. If less than 5 ohms, replace the Power Train CAN harness.
4. ACM Failure.
5. CPC Failure.
6. Wiring between the ACM, CPC, and MCM.
7. MCM Failure.

Categories , , Tags , , , , , , , , , , , , , , , , , , ,
Facebook Twitter Youtube
Wiring Diagrams
Component Locators

Related products