PACCAR MX (2004 Emissions) Fault Code: P102C VTG Turbocharger Turbine – Malfunction
PACCAR MX (2004 Emissions) Fault Code: P102C VTG Turbocharger Turbine – Malfunction
SET CONDITIONS:
The PCI ECU (D420) detects that the turbine shaft of the VTG turbocharger is broken or stuck.
DIAGNOSTIC CONDITION:
This diagnostic runs:
1. When the engine is running and
2. No malfunctions are detected on the turbo speed sensor and boost pressure sensor.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
Malfunction on VTG turbocharger
ADDITIONAL INFORMATION:
For this diagnostic, the PCI ECU checks the likely readings from the turbo speed sensor (F683) and the boost pressure sensor (F802) for a certain engine speed and fuel injection quantity.
-
Hino Diagnostic eXplorer 2 – Hino DX2 1.1.19.1 with keygen unlocked ( Hino trucks )
Hino $50.00Rated 0 out of 5
Related products
-
SERVICE MANUAL International Engines DT466 & DT570 (2004-2006) D
INTERNATIONAL ENGINES $34.00Rated 0 out of 5 -
SERVICE MANUAL Carrie Starbird TDB/TDS-215 and Starbird PlusTDB/TDS-219
CARRIE $24.00Rated 0 out of 5 -
SERVICE MANUAL International Engines DT466 & DT530 (2001-2003) C
INTERNATIONAL ENGINES $31.00Rated 0 out of 5