Detroit DD15 GHG14 (2014-16) Fault Code: SPN 4795 FMI 31 (ACM) Diesel Particulate Filter Outlet Temperature Response – Too Fast
NOTE: This fault indicates the Aftertreatment Control Module (ACM) has detected a sudden temperature shift on the Diesel Particulate Filter (DPF) outlet temperature sensor. The most likely cause is an intermittent wiring concern (poor terminal fit, corrosion, chaffing, etc.).
NOTE: Please see the step by step troubleshooting procedures for this specific code.
NOTE: If 3246-3 or 3246-4 are active, fix those first.
PROBABLE CAUSES:
1. Check all wiring and connectors for the DPF outlet temperature sensor.
2. DPF outlet temperature sensor.
3. Inspect all harnesses and connectors between the DPF outlet temperature sensor and the ACM (Aftertreament Control Module).
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: U0032 J1850 (Class 2) Serial Data Communication Link High
1000 & 2000 Gen 4 $50.00 -
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1301 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1096 J1850 (Class 2) IPC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0876 Transmission Reverse Pressure Switch Circuit Stuck Open
1000 & 2000 Gen 4 $50.00 -
