The Engine Oil Level/Temperature Sensor contains two thermistors, one for engine oil temperature and one for engine oil level. The resistance of the engine oil temperature portion of the sensor changes inversely to the temperature of the engine oil. When the engine oil is cold, the sensor resistance is high. As the temperature of the engine oil increases, the sensor resistance decreases.
The Engine Control Module (ECM) monitors the voltage drop across the sensor and uses this signal to warn the driver and derate the engine to avoid engine damage if the signal is not within programmed limits.
Conditions for diagnostic trouble code (DTC):
1) Temperature too high
Observable symptoms
1) Info lamp lights up if the temperature is moderately above range
2) Red lamp lights up if the temperature is critically above range
3) A buzzer sounds if the temperature is critically above range
4) Engine de-rated
Probable cause
1) Extreme driving conditions
2) Engine cooling fan
3) Oil thermostat
4) Cooling System
5) Clogged oil cooler
6) Engine oil level (EOL) and temperature sensor
Related products
-
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PID: 171 SPN: FMI: 4 Ambient Air Temperature voltage low
3406E (Prefix 5DS or 1LW) -
Volvo Engine D12D AE E3 (Tier 3) Fault Code: PPID19 FMI 3 Internal EGR Status
D12D AE E3 (Tier 3) -
Detroit DD15 GHG14 (2014-16) Fault Code: SPN 713 FMI 3 (CPC) Short to Power
DD15 GHG14 (2014-16) -
Volvo All Engines (2017 Emissions) Fault Code: P114113 PID: EMS Buffered Idle Validation Switch Wire – ECM Side
All Engines (2017 Emissions)