The function identifies and indicates malfunction of the aftertreatment diesel particulate filter (DPF) by analyzing the pressure drop over the aftertreatment DPF. This is done by making a check for deviation between sensor value and a model pressure drop. In some extreme cases the engine will derate.
Conditions for diagnostic trouble code (DTC):
1) High differential pressure across the filter (> 35 kPa (5 psi / 10.3 in-Hg))
Observable symptoms
1) Low Power
2) Medium to high derate
Probable cause
1) Excessive smoke from the engine
2) Aftertreatment diesel particulate filter (DPF) is loaded with soot
3) Aftertreatment diesel particulate filter (DPF) is loaded with ash
4) Incomplete regeneration, driver has not allowed regeneration to complete
5) Regeneration inhibited, driver has not allowed regeneration to take place
6) Charge air system leakage
7) EGR System Faulty
8) Aftertreatment DPF Differential Pressure Sensor
Related products
-
Allison 1000 & 2000 Gen 5 Fault Code:P2763 TCC PCS Control Circuit High
1000 & 2000 Gen 5 -
Allison 1000 & 2000 Gen 5 Fault Code:P2764 TCC PCS Control Circuit Low
1000 & 2000 Gen 5
-
Detroit DD15 EPA10 (2010-13) Fault Code: SPN 2791 FMI 5 (MCM) Open Circuit
DD15 EPA10 (2010-13) -
Volvo All Engines (2013 Emissions) Fault Code: P260200 PID: EMS Coolant Pump “A” Control Circuit Low
All Engines (2013 Emissions)