The function identifies and indicates malfunction of the aftertreatment diesel particulate filter (DPF) by analyzing the pressure drop over the aftertreatment DPF. This is done by making a check for deviation between sensor value and a model pressure drop. In some extreme cases the engine will derate.
Conditions for diagnostic trouble code (DTC):
1) The voltage at pin A137:26 is more than 4.75?V
Diagnostic operating conditions
1) Ignition key in ON position
Observable symptoms
1) Regeneration not possible
Probable cause
1) Connector
2) Open circuit, Ground wire
3) Short circuit to 5V, Signal wire
4) Short circuit to battery voltage, Signal wire
5) Wiring harness
6) Aftertreatment DPF Differential Pressure Sensor
7) Aftertreatment Control Module (ACM)
Related products
-
Volvo Engine D12D AE E3 (Tier 3) Fault Code: PID98 FMI 1 Engine Oil Level
D12D AE E3 (Tier 3) -
Volvo All Engines (2017 Emissions) Fault Code: P112198 PID: EMS EGR Temperature Too High
All Engines (2017 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P241E00 PID: ACM Reductant Heater Coolant Control Valve Stuck Closed
All Engines (2013 Emissions)