Volvo All Engines (2010 Emissions) Fault Code: SPN 4376 FMI 5 PID: PSID 105 Aftertreatment Diesel Exhaust Fluid Pump (DEF) Return Valve
When ignition key is turned to OFF position the selective catalytic reduction (SCR) system enters afterrun mode. During afterrun, system attempts to drain diesel exhaust fluid (DEF) from the DEF dosing valve, DEF pump and DEF lines. Aftertreatment control module (ACM) activates DEF return valve by grounding the control wire (-). When the return valve is activated, the DEF reverses flow back to the tank, and DEF dosing pressure is expected to drop. If the dosing pressure does not drop or if it increases during afterrun, the return valve is considered to have a mechanical fault.
Conditions for diagnostic trouble code (DTC):
1) Open circuit
Observable symptoms
1) Aftertreatment Diesel Exhaust Fluid (DEF) Pump After-run not possible
Probable cause
1) Open circuit, Control wire (-)
2) Open circuit, Common voltage supply
3) Wiring harness
4) Aftertreatment Diesel Exhaust Fluid (DEF) Pump
-
2021 VOLVO PREMIUM TECH TOOL PTT V2.8.21 VCADS+DEVELOPER TOOL+APCI 2021/09 ( 1 PC )
Trucks software $85.00
Related products
-
Volvo All Engines (2013 Emissions) Fault Code: P06B500 PID: ACM Sensor Power Supply “B”
All Engines (2013 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P112E00 PID: EMS Exhaust Gas Temperature Moderately High Bank 1
All Engines (2017 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P208A13 PID: ACM Reductant Pump “A” Control
All Engines (2017 Emissions) -
Allison 1000 & 2000 Gen 4 Fault Codes: P0218 Transmission Fluid Over Temperature Condition
1000 & 2000 Gen 4 $50.00 -
Volvo All Engines (2013 Emissions) Fault Code: P20B172 PID: ACM Reductant Heater Coolant Control Valve Control
All Engines (2013 Emissions)