Cummins ISL CM850 (2003-06) Fault Code: 2386 PID: SPN: 2975 FMI: 6 Turbocharger actuator motor circuit – current is above normal. Excessive current detected at the turbocharger actuator motor circuit.
Cummins ISL CM850 (2003-06) Fault Code: 2386 PID: SPN: 2975 FMI: 6 Turbocharger actuator motor circuit – current is above normal. Excessive current detected at the turbocharger actuator motor circuit.
The ECM monitors the current draw of this circuit. If the ECM detects excessive current for a calibrated period of time, it records this fault.
Possible causes:
1)Turbocharger actuator motor signal (+ or -) leads shorted together in the engine harness, turbocharger actuator motor, or ECM
2)Low turbocharger actuator motor internal resistance.
Possible repairs:
1)Replace the turbocharger actuator assembly.
2)Repair or replace the engine harness.
3)Replace the turbocharger actuator motor assembly.
4)Replace the turbocharger.
![download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software](https://www.ecuforcetruck.com/wp-content/uploads/2023/05/MPDR-3.7.00-300x300.png)
Related products
-
-
-
-
-
-
-
-
-
Allison 1000 & 2000 Gen 5 Fault Code:P2764 TCC PCS Control Circuit Low
1000 & 2000 Gen 5 -
-
-
-
-
Allison 1000 & 2000 Gen 5 Fault Code:U0074 CAN Communications BUS 2 Off
1000 & 2000 Gen 5 -
