The aftertreatment control module (ACM) monitors the pressure build up in the diesel exhaust fluid (DEF) dosing system. This diagnostic function checks the time it takes for the DEF dosing pressure to reach more than 650 kPa (94 psi). If the pressure is not reached in 20 minute(s) this DTC will be set.
Conditions for diagnostic trouble code (DTC):
1) Aftertreatment DEF Dosing Pressure Lower than expected
Observable symptoms
1) No aftertreatment diesel exhaust fluid (DEF) dosage
2) Engine de-rated
Probable cause
1) Empty tank
2) Frozen aftertreatment diesel exhaust fluid (DEF)
3) DEF Supply from Aftertreatment DEF Tank disconnected
4) Aftertreatment DEF Line(s) Leakage
5) Aftertreatment DEF dosing valve Leakage
6) Aftertreatment Diesel Exhaust Fluid (DEF) Pump Leakage
7) Damaged sending unit inside the aftertreatment DEF tank
8) Damaged or clogged filter
9) Aftertreatment DEF Dosing Pressure Sensor, Incorrect value
10) Aftertreatment Diesel Exhaust Fluid (DEF) Return Valve
11) Blocked DEF tank ventilation hose
12) Air in the system
13) Crystallization inside the DEF pump
14) Low level in Aftertreatment diesel exhaust fluid (DEF) tank
15) Contamination or debris inside DEF tank
Related products
-
Allison 1000 & 2000 Gen 5 Fault Code:P2761 TCC PCS Control Circuit Open
1000 & 2000 Gen 5 -
Allison 1000 & 2000 Gen 5 Fault Code:U0100 Lost Communication With ECM A
1000 & 2000 Gen 5
-
Volvo All Engines (2013 Emissions) Fault Code: P020312 PID: EMS Cylinder 3 Injector “A”
All Engines (2013 Emissions) -
Volvo All Engines (2017 Emissions) Fault Code: P10C013 PID: EMS Volvo Compression Brake (VCB) Control “2” Circuit
All Engines (2017 Emissions)