When the aftertreatment selective catalytic reduction (SCR) system operates under normal conditions, the aftertreatment control module (ACM) monitors diesel exhaust fluid (DEF) dosing valve duty cycle and DEF pump control value. When the DEF dosing valve duty cycle increases above allowed threshold and the DEF pump control value decreases below expected threshold, the ACM stops DEF dosing and reports a fault. The fault might be indication of electrical failure or blockage in DEF dosing valve or DEF supply line from the DEF tank.
Conditions for diagnostic trouble code (DTC):
1) Short circuit to ground
Observable symptoms
1) No aftertreatment diesel exhaust fluid (DEF) dosage
Probable cause
1) Connector
2) Wiring harness
3) Aftertreatment diesel exhaust fluid (DEF) dosage valve
4) Dosage electronic control unit (ECU), pump unit
-
Volvo Premium Tech Tool PTT 2.8.130 Diagnostic Software 04.2022 ACPI ( 1 PC )
Trucks software $143.00
Related products
-
Allison 1000 & 2000 Gen 5 Fault Code:P2763 TCC PCS Control Circuit High
1000 & 2000 Gen 5 -
Allison 1000 & 2000 Gen 5 Fault Code:U0073 CAN Communication Bus 1 Off
1000 & 2000 Gen 5
-
Volvo All Engines (2017 Emissions) Fault Code: P009200 PID: EMS Fuel Rail Pressure Regulator Control Circuit High
All Engines (2017 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P203111 PID: ACM Exhaust Gas Temperature Sensor Bank 1 Sensor 2
All Engines (2013 Emissions) -
Detroit DD16 GHG14 (2014-16) Fault Code: SPN 91 FMI 4 (CPC) Circuit Failed Low
DD16 GHG14 (2014-16)