When the aftertreatment selective catalytic reduction (SCR) system operates under normal conditions, the aftertreatment control module (ACM) monitors diesel exhaust fluid (DEF) dosing valve duty cycle and DEF pump control value. When the DEF dosing valve duty cycle increases above allowed threshold and the DEF pump control value decreases below expected threshold, the ACM stops DEF dosing and reports a fault. The fault might be indication of electrical failure or blockage in DEF dosing valve or DEF supply line from the DEF tank.
Conditions for diagnostic trouble code (DTC):
1) Short circuit to ground
Observable symptoms
1) No aftertreatment diesel exhaust fluid (DEF) dosage
Probable cause
1) Connector
2) Wiring harness
3) Aftertreatment diesel exhaust fluid (DEF) dosage valve
4) Dosage electronic control unit (ECU), pump unit
Related products
-
Allison 1000 & 2000 Gen 5 Fault Code:U0100 Lost Communication With ECM A
1000 & 2000 Gen 5 -
Allison 1000 & 2000 Gen 5 Fault Code:U0073 CAN Communication Bus 1 Off
1000 & 2000 Gen 5
-
Volvo All Engines (2013 Emissions) Fault Code: P047513 PID: EMS Exhaust Pressure Control Valve “A”
All Engines (2013 Emissions) -
Detroit DD16 EPA07 (2007-09) Fault Code: SPN 3510 FMI 3 (CPC) High Voltage
DD16 EPA07 (2007-09) -
Volvo All Engines (2013 Emissions) Fault Code: P052013 PID: EMS Engine Oil Pressure Sensor/Switch “A”
All Engines (2013 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P019564 PID: EMS Engine Oil Temperature Sensor “A”
All Engines (2013 Emissions) -
Detroit DD15 EPA10 (2010-13) Fault Code: SPN 132 FMI 1 (MCM) Air Mass Flow Too Low
DD15 EPA10 (2010-13) -
Detroit DD15 EPA07 (2007-09) Fault Code: SPN 190 FMI 0 (MCM) Engine Over Speed
DD15 EPA07 (2007-09)