Cummins ISL CM850 (2003-06) Fault Code: 2272 PID: 27 SPN: 27 FMI: 4 Exhaust Gas Recirculation (EGR) valve position circuit – voltage below normal or shorted to low source. Low signal voltage detected at the EGR valve position sensor circuit.
Cummins ISL CM850 (2003-06) Fault Code: 2272 PID: 27 SPN: 27 FMI: 4 Exhaust Gas Recirculation (EGR) valve position circuit – voltage below normal or shorted to low source. Low signal voltage detected at the EGR valve position sensor circuit.
The EGR valve position sensor shares SUPPLY and RETURN wires in the engine harness with other sensors. Open circuits and short circuits in the engine harness can cause multiple fault codes to be active.
Possible causes:
1)SIGNAL circuit open or shorted to ground
2)SUPPLY circuit open or shorted to ground
3)Sensor shorted to ground.
Possible repairs:
1)Replace the EGR valve assembly.
2)Repair or replace the engine harness.
3)Replace the engine control module.
![International Truck ISIS - Oncommand Service Information Q4.2020 [04.2020]](https://www.ecuforcetruck.com/wp-content/uploads/2022/01/OnCommand-2020-1-300x300.png)
![DAF Davie Runtime v5.6.1 Davie XDc ll [02.2019] + Expire Fix 302.00 Unlock ( Windows 7 )](https://www.ecuforcetruck.com/wp-content/uploads/2021/09/Capture-2-300x300.png)
Related products
-
-
-
-
-
-
-
-
-
-
-
Allison 1000 & 2000 Gen 5 Fault Code:P2764 TCC PCS Control Circuit Low
1000 & 2000 Gen 5 -
-
Allison 1000 & 2000 Gen 5 Fault Code:U0074 CAN Communications BUS 2 Off
1000 & 2000 Gen 5 -
-
