This function is used to check if the Exhaust Gas Recirculation (EGR) temperature sensor is working and check the status on the EGR cooler. If the sensor should show a value above limit due to extreme driving or malfunction in the cooler, the Engine Control Module (ECM) will derate the engine to avoid damage.
Conditions for diagnostic trouble code (DTC):
1) The voltage at pin A14.EB:48 is less than 0.024?V
Observable symptoms
1) Engine de-rated
Probable cause
1) Connector
2) Temperature sensor, EGR
3) Open circuit, Ground wire
4) Short circuit to higher voltage, Signal wire
5) Wiring harness
6) Engine control module (ECM)
Related products
-
Volvo All Engines (2013 Emissions) Fault Code: P052001 PID: EMS Engine Oil Pressure Sensor/Switch “A”
All Engines (2013 Emissions) -
Volvo All Engines (2004 Emissions) Fault Code: SID 39 FMI 14 Starter Output
All Engines (2004 Emissions) -
Volvo All Engines (2004 Emissions) Fault Code: PID 224 FMI 12 Immobilizer
All Engines (2004 Emissions) -
Volvo All Engines (2010 Emissions) Fault Code: SPN 412 FMI 4 PID: Engine Exhaust Gas Recirculation Temperature
All Engines (2010 Emissions) -
Volvo All Engines (2013 Emissions) Fault Code: P20E797 PID: ACM Reductant Injection Air Pressure Too High
All Engines (2013 Emissions)