Volvo All Engines (2013 Emissions) Fault Code: P020412 PID: EMS Cylinder 4 Injector “A”

Volvo All Engines (2013 Emissions) Fault Code: P020412 PID: EMS Cylinder 4 Injector “A”

Circuit description
Fuel Injector operation is controlled by the Engine Control Module (ECM). The ECM provides a common supply voltage to injectors 4,5,6 (Bank 2) and there are individual output transistor drivers inside the ECM to control each individual injector?s ground circuits. There are two solenoid circuits within the injector; a Needle Control Valve and a Spill Valve. Although they are separate circuits, the same fault code is used to identify a fault in the Needle Control Valve circuit and/or the Spill Valve circuit.

Conditions for diagnostic trouble code (DTC)
Injector (INJ) activated

Diagnostic operating conditions
Ignition key in OFF position

Observable symptoms
Low Power
Engine runs unevenly or misfires
Abnormal noise
Engine is operating on only 3 or 5 cylinders

Probable cause
1) Connector
2) Wiring harness
3) Injector
4) Engine control module (ECM)